In the process of using a floor scrubber, you may encounter various malfunctions. To help you better cope with these faults, we have compiled a list of common faults and their possible causes and solutions.

Unable to start

Possible causes: power problems, machine failure, switch problems.
Solution: Check the power connection, confirm the machine status, replace the switch.
Poor cleaning effect

Possible causes: wear and tear of the brush head, water quality problems, insufficient water.
Solution: Replace the brush head, improve the water quality, increase the water volume.
Excessive noise

Possible causes: loose parts, bearing wear.
Solution: Tighten machine parts, replace bearings.
Short battery life

Possible causes: aging battery, charging problem.
Solution: Replace the battery with a new one, check the charging equipment.
Difficulty in operation

Possible causes: unfamiliar operation, machine settings.
Solution: Read operating instructions, adjust machine settings.
 

As the use of handheld hoovers is becoming more and more widespread, people are using them for longer and longer periods of time, which leads to some problems that will occur, and among the many problems, the common one is that the hoover does not vacuum, and the following is a small explanation of how to do with the knowledge that handheld hoovers do not vacuum.

1, need to check the hose, nozzle

Because the hoover's dust bag interface or make the dust bag microporous blocked will cause the hoover does not vacuum, so check the hose and nozzle. Users should dismantle the hoover to shake off the dust inside the hose, clean the nozzle and the dust bag suction mouth of the blockage, or directly replace the dust bag.

2.Check the dust filter bag

A dusty filter bag may also cause the hoover not to vacuum. The filter has a dust bag made of flannel, it is very easy to stick dust to cause blockage, then the user just shake the dust shaker will be flannel bag on the dust shake off.

3、Check whether there are cracks between the top cover and the middle shell.

If the seal between the top cover and the middle shell of the hoover is not tight, users should tighten the screws.

4、Check whether the seal between the motor and the hoover is tight or not

Users should check whether the screws and gaskets around the motor of the hoover are tight or not, and if they are found to be loose, they should be padded and tightened immediately. If the gasket is missing, it should be replaced.

5、Check if the brush bristles of the hoover are worn out.

This is because sometimes the motor of the hoover is still rotating, but the brush can no longer pick up dust, so the suction power will naturally decrease. Users should dismantle the brush and adjust the position of the brush assembly so that the bristles of the brush can stick to the floor well and pick up dust fully. Of course, if you find that the brush has been badly worn, you should replace it immediately.

6、Check whether the fan blade has been fixed tightly

When the hoover fan blade slides on the motor shaft, it will also affect the hoover's vacuuming effect to a certain extent. Users should tighten the positioning screws of the fan blade.

Hoovers make it easy to keep our floors clean and dust free Considering the amount of work we provide them with, they are prone to occasional malfunctions, but most hoover problems are easy to fix. When trying to clean the floors in your home, you suddenly realise that your hoover won't turn on. This fault can occur due to a variety of factors, but it's important to try and identify the root cause of the fault to better solve it, so to help you in this process, check out the troubleshooting guide below.